|
 aquastar
winsoft Version 0.19.0
The free PC-programm iks aquastar winsoft version 0.19.0
is here for free download. With this programm the actual sensor data can
be easily transfered and displayed on the PC. In this version, the programming
data of aquastar (since aquastar version 2.19, not aquastar midi ) can be
read in, represented in clear form , altered and permanently saved in a file.
As well the aquastar can newly be configured.
In opposition to the iks datastar programm, the stored
sensor data, read in via aquastar winsoft, can be exported more comfortable
to many spread sheet software tools (e.g. MS Excel) (for this, please see
Bedieningshandleiding iks aquastar winsoft version v0.1).
 Please,
download Bedieningshandleiding for the aquastar winsoft software first, and read the
topic "installation".
  Winsoft
version 0.19.0 is tested under Windows XP
User
manual:
M_winsft.pdf (
596 kB)
M_winsft.exe (
213 kB) ( MS Word 9)
Installation
winsoft version 0.1:
If
you did not install the winsoft software demo version v0.1 on your PC so
far yet, please download first the demo version
0.1 and install it:
iks aquastar winsoft demoversion v0.1 ( 5,3 MB
)
For
installation of the version v0.1, please read the chapter "Installation" of
the Bedieningshandleiding M_winsft.pdf first.
Installation
winsoft version 0.19.0:
For
installation of version 0.19.0, you must proceed as follows:
If
you have already installed the winsoft demo software version v0.1
on your PC before, please download one
of the following two files:
winsoft0190e.exe ( 1,0 MB ) (self
extracting archive (.EXE) ) We recommend to download this file !
winsofts0190e.zip ( 1,0 MB ) Download
this file, if you have a unzip tool. (zip-file - if your e-mail client blocks
opening attached file-types of level 1 (e.g. EXE-files).
Copy
one of these 2 files into the installation directory of the winsoft software
version 0.1 on your PC (e.g. C:\Programs\iks\aquastarwinsoft\..
)
In
this directory there are also the directories "Database" "Pics" and "Sound".
Rename
the old file "winsoft.exe" to "winsoft01.exe".
Double-click
the file "winsoft0190e.exe". The window "WinZip
Self-Extractor" appears.
Delete
the whole file path in "Unzip-Verzeichnis" and
key in just a point " . " there. Then press the
button "Unzip".
The
message "1 Dateien erfolgreich mit Unzip entpackt" appears.
Click OK.
There
upon the file become unpacked in the installation directory.
Click "Schließen" to close the window.
Then
the new software file "winsoft.exe" appears in
the installation directory. - Finished !
If
you have loaded down the zipped file "winsofts0190e.zip", you have
to extract this file with a zip software tool
(WinZip: www.winzip.de; PKzip: http://www.pkware.com/downloads/ ). Please
make sure, that the file "winsofts0190e.zip" was
extracted in the installation directory, stated above.
Then
the new software file "winsoft.exe" appears.
- Finished!
As
usual you can start now the software "winsoft" with the windows "START" button "Programs
- aquastar winsoft - winsoft" or you can
click the icon "winsoft" on the desktop or in the task bar (if
you have set it up before).
This
version is only compatible with aquastar firmware v2.19!
Please
note that we cannot carry out telephone support for the free PC software
winsoft version v0.19.0 and/or v0.1 .
Please
read first the "Frequently asked questions - FAQs".
-----> link to the FAQs
If you have further questions, please contact via e-mail sw1@iks-aqua.com
or fax : +49 (0) 7202 9411 - 41
Please indicate "winsoft software" for the subject !
 back
to choice
|
FAQ
