HomeContactE-MailApproachImprintTerms & Conditions

The iks pH-electrode (item no. 1201)

  Laboratory-quality electrodes

 

Technical data:

       

  Shaft: Black polysufone shaft
  Shaft length: 120 mm
  Shaft diameter: 12 mm
  Diaphragm: Ceramic
  pH-range: 0....14
  Electrolyte:Gel
  Temperature range: 0....80°C
  Maintenance: Low-maintenance
  Cable: 2 m low-interference, coaxial cable
  Connection: BNC connector

 

The iks redox-electrode (item no. 1301)

  Laboratory-quality electrodes

 

Technical data:

 

  Shaft: Black polysufone shaft
  Shaft length: 120 mm
  Shaft diameter: 12 mm
  Diaphragm: Ceramic
  Electrolyte: Gel
  Temperature range: 0....80°C
  Maintenance: Low-maintenance
  Cable: 2 m low-interference, coaxial cable
  Connection: BNC connector
  Platinum cap diameter: 6 mm

 

The iks temperature sensor (item no. 1501)

  Waterproof temperature sensor

 

Technical data:

 

 Cable: 3 m - long, black supply line
 Sensor element: Pt 1000 Class A
 Connection: BNC connector
 Special feature: Sensor can also be operated under water (e.g. on the tank floor)

 

The iks oxygen-electrode (item no. 1601)

  Maintenance-free sensor

 

Technical data:

 

 Measuring range from 0 to 150%, 0 to 20 mg/l
 Temperature range 0 to 50°C
 Accuracy under exposure to current of 2cm/s ca. 5% below real value
 Accuracy under exposure to current of 5cm/s ca. 1% below real value
 High-quality, low-maintenance Clark measuring cell
 Long sensor-life (physically 2 years)
 Incl. calibration equipment for precise calibrating
 Easy to use

 

Sensor holder

With this sensor holder, you can attach up to four sensors to your aquarium.The holder is suitable for vertical as well as horizontal fitting. For wall-thickness up to 16 mm.

 

calibration solutions, cleaning solutions etc.

How accurate a measurement is depends, among other factors, greatly on the calibration. Precondition for good calibration is precision calibration-solutions. Please, don' forget that calibration solutions don't keep forever either. Using the special cleaning solution (Item No. 1207) prolongs the life of pH and redox electrodes.

 

 
Order number Calibration solution / 50 ml bottle
1202 pH 4
1203 pH 7
1204 pH 9
1302 Redox 230 mV
1401 Conductivity 1 mS/cm (1000 µS)
1402 Conductivity 50 mS/cm


 












Home E-Mail Sitemap